Aluminas
Intermediate-purity alumina (Al₂O₃) < 98% · High-purity alumina (Al₂O₃) > 98%
Alumina
Intermediate-purity alumina (Al₂O₃) < 98%
Intermediate-purity alumina, between 90% and 96%, marks the transition to ceramics with a dominant oxide matrix.
They contain a residual glassy phase (silicates) that makes sintering easier at moderate temperatures of 1500°C.
Their hardness and compressive strength are clearly increased compared with technical porcelain.
Advantages over aluminous porcelain:
Higher abrasion resistance and hardness, as well as better thermal stability allowing more severe mechanical uses.
Industrial applications:
- Grinding balls
- Thermal protection tubes
- Sandblasting nozzles and textile thread guides
- Valves
- Supports
High-purity alumina
High purity · Al₂O₃ above 98% and 99.7%
High-density alumina, from 98% to 99.7%, is a quasi single-phase ceramic (alpha-corundum) free of glassy phase.
It has almost zero porosity and extreme hardness (~1800 HV). Its chemical inertness is total against corrosive agents (pH 0-14).
Advantages over 92-96% alumina:
Clearly higher structural rigidity (Young’s modulus ~380 GPa), better thermal conductivity and absolute chemical resistance due to the absence of silicates, which are sensitive to acid or alkaline attack.
Industrial applications:
- Ballistic protection
- Semiconductor components
- Medical instrumentation and orthopaedic implants
- High-precision laboratory crucibles and valves for corrosive fluids
Characteristics of alumina and high-purity alumina
| Characteristics | Property | Units | 90 % | 92 % | 96 % | 98 % | 99.7 % |
|---|---|---|---|---|---|---|---|
| Intrinsic | Purity / composition | % | 90 | 92 | 96 | 98 | 99.7 |
| Density | g/cm³ | 3.6 | 3.7 | 3.75 | 3.8 | 3.9 | |
| Porosity | % | 0 | 0 | 0 | 0 | 0 | |
| Mechanical | Rockwell 45N hardness | 76 | 78 | 80 | 82–84 | 83–85 | |
| Fracture toughness | MPa·m½ | 3–4 | 3–4 | 4–5 | 4–5 | 4–5 | |
| Young’s modulus | GPa | 275 | 280 | 300 | 350 | 400 | |
| Flexural strength | MPa | 250 | 280 | 310 | 330 | 350 | |
| Ultrasonic velocity | m/s | 9300 | 9500 | 10200 | 10300 | 10500 | |
| Thermal | Thermal conductivity | W·m⁻¹·K⁻¹ | 20 | 20 | 24 | 26 | 30 |
| Electrical | Resistivity | Ω·cm | 1×10¹⁴ | 1×10¹⁵ | 1×10¹⁵ | 1×10¹⁴ | 1×10¹⁴ |